Washer Weight Chart in mm, kg, PDF
Washer Weight Chart in kg, mm & PDF
A Washer Weight Chart in mm, kg, PDF is a helpfull tool to differentiate the weight and size of Washers as per the client’s uses and application. Diverse sizes and weights of Wahers in mm, kg, and PDF are available in Vardhaman INC. A washer weight chart is a visual representation or a table that provides information about the weight, length and thickness of Washers commonly used in various industries, including construction, automotive, and manufacturing. These charts are helpful for several reasons, such as Product Selection, Load Calculation, Cost Estimation, Quality Control, etc.
Washer Weight Chart in kg
Weight Chart of Washer in kg with approx weight mention in the table below.
| APPROX. WEIGHT IN KGS FOR 100 NOS | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SIZE | PLAIN PUNCHED WASHER IS:2016 |
HEAVY WASHER IS:6610 |
MACHINED WASHER IS:2016 |
SQUARE TAPER WASHERS | SPRING WASHER FLAT SECTION IS:3063-72 | SPRING WASHER SQUARE SECTION IS:6735-72 DIN: 7980 |
Size (Inches) | PLAIN PUNCHED WASHER BS:3410 TABLE 7 |
SPRING WASHER FLAT SECTION BS:1802-1951 | SPRING WASHER SQUARE SECTION BS:1802-1951 | |||
| MACHINED | HIGH STRENGTH FRICTION GRIP |
||||||||||||
| FOR CHANNELS IS:5372-75 |
FOR I-BEAM IS:5374-75 |
TYPE-B (CHANNELS) IS: 6649-85 |
TYPE-C ( I-BEAMS ) IS: 6649-85 |
||||||||||
| M-3 | 0.01 | 0.01 | |||||||||||
| M-4 | 0.02 | 0.02 | |||||||||||
| M-5 | 0.04 | 0.04 | 0.03 | 0.03 | |||||||||
| M-6 | 0.11 | 0.11 | 0.08 | 0.04 | 1/4″ | 0.21 | |||||||
| M-8 | 0.20 | 0.21 | 1.10 | 1.20 | 0.16 | 0.11 | 5/16″ | 0.35 | |||||
| M-10 | 0.39 | 1.60 | 0.40 | 1.00 | 1.10 | 0.25 | 0.20 | 3/8″ | 0.48 | ||||
| M-12 | 0.58 | 1.90 | 0.62 | 2.00 | 2.20 | 2.00 | 1.80 | 0.38 | 0.23 | 1/2″ | 1.07 | ||
| M-14 | 0.82 | 0.60 | 0.38 | ||||||||||
| M-16 | 1.06 | 2.90 | 1.13 | 3.40 | 3.75 | 9.00 | 8.50 | 0.89 | 0.59 | 5/8″ | 1.85 | ||
| M-18 | 1.27 | 0.97 | 0.66 | ||||||||||
| M-20 | 1.64 | 4.40 | 1.72 | 5.80 | 6.70 | 8.50 | 8.00 | 1.52 | 1.23 | 3/4″ | 2.91 | ||
| M-22 | 1.75 | 7.50 | 7.00 | 1.65 | 1.36 | 7/8″ | 4.27 | ||||||
| M-24 | 3.11 | 6.30 | 3.30 | 13.50 | 16.00 | 6.50 | 6.00 | 2.62 | 1.81 | 1″ | 6.13 | ||
| M-27 | 3.94 | 8.00 | 4.23 | 12.50 | 15.00 | 12.00 | 11.50 | 2.87 | 2.06 | 1.1/8″ | 7.69 | ||
| M-30 | 5.05 | 10.10 | 5.36 | 16.50 | 18.70 | 17.50 | 16.00 | 4.43 | 3.20 | 1.1/4″ | 9.90 | ||
| M-33 | 7.10 | 12.00 | 7.54 | 21.00 | 23.50 | 23.00 | 22.50 | 6.30 | 3.50 | ||||
| M-36 | 8.73 | 14.60 | 9.20 | 25.50 | 29.20 | 26.50 | 26.00 | 6.73 | 5.25 | 1.1/2″ | 17.24 | ||
| M-39 | 12.60 | 16.70 | 13.30 | 28.30 | 34.50 | 7.17 | 5.61 | ||||||
| M-42 | 17.50 | 20.10 | 18.30 | 11.10 | 8.00 | ||||||||
| M-45 | 21.20 | 22.20 | 22.00 | 11.70 | 8.53 | ||||||||
| M-48 | 28.40 | 26.00 | 29.40 | 12.30 | 9.00 | 2″ | 27.78 | ||||||
| M-52 | 31.90 | 33.00 | 18.20 | ||||||||||
| M-56 | 47.90 | 19.30 | |||||||||||
| M-60 | 51.60 | 20.30 | |||||||||||
| M-64 | 55.40 | 21.80 | |||||||||||
| M-68 | 57.40 | ||||||||||||
| M-72 | 63.40 | 24.00 | |||||||||||
Washer Size Chart in mm, kg
Size Chart of Washer in mm, kg with thickness and diameter highlighted in the table below.
| NOM SIZE MM | Inner Dia (d) Basic Tol (+) | Outer Dia (d1) Max | WIDTH (b) Basic Tol (+ or -) | THICKNESS (S) Basic Tol (+ or -) | Weight per 1000 in Kgs | |||
|---|---|---|---|---|---|---|---|---|
| 3 | 3.1 | 0.3 | 6.2 | 1.3 | 0.1 | 0.8 | 0.1 | 0.11 |
| 4 | 4.1 | 0.3 | 7.6 | 1.5 | 0.1 | 0.9 | 0.1 | 0.18 |
| 5 | 5.1 | 0.3 | 9.2 | 1.8 | 0.1 | 1.2 | 0.1 | 0.36 |
| 6 | 6.1 | 0.4 | 11.8 | 2.5 | 0.15 | 1.6 | 0.1 | 0.83 |
| 8 | 8.1 | 0.4 | 14.8 | 3 | 0.15 | 2 | 0.1 | 1.60 |
| 10 | 10.2 | 0.5 | 18.1 | 3.5 | 0.2 | 2.2 | 0.15 | 2.53 |
| 12 | 12.2 | 0.5 | 21.1 | 4 | 0.2 | 2.5 | 0.15 | 3.82 |
| 14 | 14.2 | 0.5 | 24.1 | 4.5 | 0.2 | 3 | 0.15 | 6.01 |
| 16 | 16.2 | 0.8 | 27.4 | 5 | 0.2 | 3.5 | 0.2 | 8.91 |
| 18 | 18.2 | 0.8 | 29.4 | 5 | 0.2 | 3.5 | 0.2 | 9.73 |
| 20 | 20.2 | 1 | 33.6 | 6 | 0.2 | 4 | 0.2 | 15.20 |
| 22 | 22.5 | 1 | 35.9 | 6 | 0.2 | 4 | 0.2 | 16.50 |
| 24 | 24.5 | 1 | 40 | 7 | 0.25 | 5 | 0.2 | 26.20 |
| 27 | 27.5 | 1 | 43 | 7 | 0.25 | 5 | 0.2 | 28.70 |
| 30 | 30.5 | 1.2 | 48.2 | 8 | 0.25 | 6 | 0.2 | 44.30 |
| 33 | 33.5 | 1.2 | 55.2 | 10 | 0.25 | 6 | 0.2 | 63.00 |
| 36 | 36.5 | 1.2 | 58.2 | 10 | 0.25 | 6 | 0.2 | 67.30 |
| 39 | 39.5 | 1.2 | 61.2 | 10 | 0.25 | 6 | 0.2 | 71.70 |
| 42 | 42.5 | 1.2 | 68.2 | 12 | 0.25 | 7 | 0.25 | 111.00 |
| 45 | 45.5 | 1.2 | 71.2 | 12 | 0.25 | 7 | 0.25 | 117.00 |
| 48 | 49 | 1.5 | 75 | 12 | 0.25 | 7 | 0.25 | 123.00 |
| 52 | 53 | 1.5 | 83 | 14 | 0.25 | 8 | 0.25 | 182.00 |
Spring Washer – Square Section Conforming To IS 6735-1972
|
NOM SIZE |
Inner Dia (d) Basic Tol (+) |
Outer Dia (d1) Max |
WIDTH (b) = THICKNESS(s) Basic Tol (+ or -) |
Weight per 1000 IN KGS |
||
|---|---|---|---|---|---|---|
|
3 |
3.1 |
0.3 |
5.6 |
1 |
0.1 |
0.105 |
|
4 |
4.1 |
0.3 |
7 |
1.2 |
0.1 |
0.195 |
|
5 |
5.1 |
0.3 |
8.8 |
1.6 |
0.1 |
0.370 |
|
6 |
6.1 |
0.4 |
9.9 |
1.6 |
0.1 |
0.425 |
|
8 |
8.1 |
0.4 |
12.7 |
2 |
0.1 |
1.05 |
|
10 |
10.2 |
0.5 |
16 |
2.5 |
0.15 |
1.96 |
|
12 |
12.2 |
0.5 |
18 |
2.5 |
0.15 |
2.28 |
|
14 |
14.2 |
0.5 |
21.1 |
3 |
0.2 |
3.8 |
|
16 |
16.2 |
0.8 |
24.4 |
3.5 |
0.2 |
5.94 |
|
18 |
18.2 |
0.8 |
26.4 |
3.5 |
0.2 |
6.6 |
|
20 |
20.2 |
1 |
30.6 |
4.5 |
0.2 |
12.3 |
|
22 |
22.5 |
1 |
32.9 |
4.5 |
0.2 |
13.6 |
|
24 |
24.5 |
1 |
35.9 |
5 |
0.2 |
18.1 |
|
27 |
27.5 |
1 |
38.9 |
5 |
0.2 |
20.6 |
|
30 |
30.5 |
1.2 |
44.1 |
6 |
0.2 |
32 |
|
33 |
33.5 |
1.2 |
47.2 |
6 |
0.2 |
35 |
|
36 |
36.5 |
1.2 |
52.2 |
7 |
0.25 |
52.5 |
|
39 |
39.5 |
1.2 |
55.2 |
7 |
0.25 |
56.1 |
|
42 |
42.5 |
1.2 |
60.2 |
8 |
0.25 |
80 |
|
45 |
45.5 |
1.2 |
64 |
8 |
0.25 |
85.3 |
|
48 |
49 |
1.5 |
67 |
8 |
0.25 |
90 |
Spring Washers Flat and Square Section As Per BSS 1802-1951
| SIZE IN INCHES |
SIZE IN MM |
FLAT SECTION WIDTH X THICKNESS |
SQUARE SECTION WIDTH AND THICKNESS |
|---|---|---|---|
| 1/8” | 3.18 | 1.2 X 0.8 | – |
| 5/32” | 3.97 | 1.6 X 0.8 | – |
| 3/16” | 4.76 | 2.3 X 1.2 | 1.6 |
| ¼” | 6.35 | 2.3 X 1.6 | 1.8 |
| 5/16” | 7.94 | 3.3 X 1.6 | 2 |
| 3/8” | 9.53 | 3.7 X 1.6 | 2.3 |
| 7/16” | 11.11 | 4.1 X 1.6 | 2.6 |
| ½” | 12.70 | 4.1 X 2.3 | 3 |
| 9/16” | 14.29 | 4.9 X 2.3 | 3.3 |
| 5/8” | 15.88 | 4.9 X 3.3 | 3.7 |
| ¾” | 19.05 | 5.9 X 3.3 | 4.5 |
| 7/8” | 22.23 | 6.4 X 3.3 | 5.4 |
| 1” | 25.40 | 7.1 X 4.7 | 5.9 |
Washer Weight Chart in Kg & PDF
